Product features: Round configuration Different sizes Custom solution under our client requirements With electric, pneumatic, hydraulic or manual actuator Function: regulating and isolating Tightness according to request: from 95-100% 100% tightness ensured by sealing air system Temperature resistance up to 600°c Operating pressure up to 0,5 bar Multitude of application worldwide, e.g. Power plants Have …
Product features: Used for the gastight isolation of flue gas ducts Round or rectangular configuration Different sizes Custom solution under our client requirements With electric, pneumatic or hydraulic actuator Function: regulating and isolating Tightness according to request: from 95-100% 100% tightness ensured by sealing air system All gas exposed parts are made of stainless steel …
Product features: Round or rectangular configuration Different sizes Custom solution under our client requirements With electric, pneumatic, hydraulic or manual actuator Function: regulating and isolating It can reroute and shut off the flue gas flow during for ex. Denitrification and desulphurization Flap damper for circular ducts are two-bladed in their construction for geometric reasons. The …
Product features: Different sizes Custom solution under our client requirements With electric, pneumatic, hydraulic or manual actuator With single or multiple blades Function: regulating and isolating Tightness according to request: from 95-100% 100% tightness ensured by sealing air system Can have fast opening/closing Temperature resistance up to 600°c Operating pressure up to 0,5 bar Casing …
Product features: Round or rectangular configuration Different sizes Custom solution under our client requirements Defined number of damper blades determined by the duct cross-section With electric, pneumatic or hydraulic actuator Function: modulating and isolating in flue gas systems Tightness according to request: from 95-100% 100% tightness ensured by sealing air system Temperature resistance up to …
Product features: Used to cut-off working medium in installation/conduit, it can allow maintenance and inspection of the duct Tightness according to request: from 95-100% Guillotine damper with sealing air, 100% sealing Different sizes Round or rectangular configuration Custom solution under our client requirements With electric, pneumatic, hydraulic or manual actuator Function: working medium (gas) isolation …
Product features: Used to regulate, isolate and divert gas in installation Diverters have three duct connections. The flap blade blocks off one of the ducts at a time. Different sizes Round or rectangular configuration custom solution under our client requirements Lattice supported blades = no thermal distortion, low cross-section loss, low weight Casing and all …
Basic data: Plant: FGD PlantCountry: PolandInvestor: LURGI – SMS, DenmarkDimensions: 6000 x 8000 mm, 8000 x 5000 mm, 3070 x 2790 mm Tandem dampers Problem: RAUMAG – JANICH negotiated a contract with LURGI – SMS, Denmark, for the design and supply of all necessary shut off and modulation dampers for the FGD plant of the …
Basic data: Plant: Combined Cycle Power StationCountry: GermanyInvestor: ALSTOM POWER BOILER, StuttgartDimensions: 17500 mm – girders Bypass – Modulation and Shut off System Problem: Raumag Janich received an order for an isolation and gas modulation speciality damper, installed in the integrated bypass duct of the waste heat recovery boiler. It should have 17500 mm long …
Basic data: Plant: FGD and DeNOx plantsCountry: AustriaInvestor: ABB – Umwelttechnik, ButzbachDimensions: 10000 x 9000 mm Louver damper Problem: Raumag Janich received an order for the design and supply of all flue gas shut-off and modulating dampers required for the FGD and DeNOx plants of the Theiss 2000 powerstation. Among that was the shut – …